General contractors

AI document review for general contractors

↳ Telamont reads every project document together, from the contract and specs to the drawings and geotechnical studies, and flags each risk with the clause it comes from.

Book a demo

What Telamont catches

See what Telamont finds in a general contractor's documents

Technical risks

Contractual risks

Compliance risks

Schedule risks

Un tableau des portes et un plan qui donnent deux dimensions différentes pour la même porteA door schedule and a plan that give two different sizes for the same door

SCTableau des portes A580Door schedule A580

MARQUEMARK

LOCALROOM

DEGRÉRATING

DIMENSIONSSIZE (W×H)

D-01

Corridor 104Corridor 104

45 min

915 × 21343'-0" × 7'-0"

D-12

Gymnase, paire de sortieGymnasium, exit pair

90 min

1830 × 21346'-0" × 7'-0"

D-14

Salle mécaniqueMechanical room

45 min

1067 × 21343'-6" × 7'-0"

PLPlan du niveau 1 A502Level 1 plan A502

D-01GYMGYM

915×21343'-0" × 7'-0"

Conflit de marqueTag conflict

Plan A502Plan A502D-01, 915 × 2134D-01, 3'-0" × 7'-0"

Tableau A580Schedule A580D-12, 1830 × 2134D-12, 6'-0" × 7'-0"

Construit selon le planBuilt from the plan2× trop étroite2× too narrow

Find where the drawings and the specs disagree

Telamont reads the drawing sheets, the specification sections and the studies together and flags every element they describe differently.

Drawings, specs and geotechnical studies compared across disciplines
Each conflict cited to the sheet and the spec section
Turn a conflict into an RFI in one click

Explore risk detection

Une garantie de deux ans au contrat principal et d'un an au sous-contrat de toitureA two-year warranty in the prime contract and a one-year warranty in the roofing subcontract

MAContrat principal, p. 33Prime contract, p. 33

12.4 L'entrepreneur garantit les travaux de toiture pendant The Contractor warrants the roofing work for deux (2) anstwo (2) years à compter de l'achèvement substantiel. from Substantial Completion.

SCSous-contrat de toiture, p. 9Roofing subcontract, p. 9

8.1 Le sous-traitant garantit ses travaux pendant The Subcontractor warrants its work for un (1) anone (1) year à compter de la réception. from acceptance.

Écart de garantieFlow-down gap

Contrat MA §12.4Prime MA §12.42 ans2 years

Sous-contrat SC §8.1Subcontract SC §8.11 an1 year

Non couvertNot covered1 an1 year

Carry the prime contract into every subcontract

Telamont compares the prime contract with each subcontract: scope, warranties, insurance, payment terms and notice periods.

Shorter warranties or lower insurance limits downstream
Scope priced in two subcontracts, or in none
Notice periods tracked with the days left

Explore notice drafting

Un garde-corps de 915 mm au détail alors que le code exige 1070 mmA 36-inch guard in the detail where the code requires 42 inches

CDCode du bâtiment, 1015.3International Building Code, 1015.3

1015.3 HauteurHeight. Les garde-corps requis doivent avoir une hauteur d'au moins Required guards shall be not less than 1070 mm42 inches, mesurée verticalement. high, measured vertically.

PLCoupe A-301Section A-301

915 mm36 in

DÉTAIL 4, BALCON NIVEAU 3DETAIL 4, LEVEL 3 BALCONY

Conflit de codeCode conflict

Code 1015.3IBC 1015.31070 mm min.42 in min.

Détail 4/A-301Detail 4/A-301915 mm36 in

ÉcartShort by155 mm6 in

Check the documents against the building code

Telamont checks the drawings and specs against the code you select, such as the International Building Code, and flags what falls short.

Code requirements the specifications do not carry
Each finding cited to the code section and the sheet
Prioritized with the rest of the project's risks

Explore risk detection

Un échéancier qui place l'achèvement substantiel 18 jours après la date du contratA schedule that puts substantial completion 18 days after the contract date

MAContrat principal, p. 14Prime contract, p. 14

3.2 L'achèvement substantiel doit être atteint au plus tard le Substantial Completion shall be achieved no later than 28 août 2027August 28, 2027.

ECÉchéancier, rév. 3Schedule, rev. 3

juinJun

juil.Jul

aoûtAug

sept.Sep

ToitureRoofing

Finitions intérieuresInterior finishes

Mise en serviceCommissioning

Achèvement subst.Substantial completion

Conflit d'échéancierSchedule conflict

Contrat p. 14Contract p. 1428 août 2027Aug 28, 2027

Échéancier rév. 3Schedule rev. 315 sept. 2027Sep 15, 2027

ÉcartLate by18 jours18 days

Hold the schedule to the contract dates

Telamont checks the schedule against the milestones, delay penalties and sequences the contract sets.

Milestones later than the contract allows
Liquidated damages and their daily rate
Approvals and sequences the schedule leaves no time for

Explore risk tracking

Results

What contractors find before construction starts

55 to 160

Risks found per project before construction starts, by the contractors we work with.

80%

Of risks flagged before execution, while they can still be settled with a conversation.

$1.4M

Of rework avoided on one project, after a code conflict was caught before execution.

Across the whole project

Telamont on every phase, from preconstruction to closeout

General contractors use Telamont on every phase of a project, from preconstruction and bid review through construction and closeout. New revisions, subcontracts and change orders are checked against what the contract already says.

Explore risk tracking

Chargé de projetProject manager

Une carte de board qui liste les exigences d'avis, chacune avec sa page du contratA Boards card listing notice requirements, each with its contract page

EstimateurEstimator

Un risque repéré avant la soumission : une taille de poutre qui diffère entre le plan S-201 et la section 05 12 00 du devisA risk flagged before the bid: a beam size that differs between drawing S-201 and spec section 05 12 00

SurintendantSuperintendent

Un surintendant pose une question à l'agent IA à voix haute et obtient une réponse qui cite le plan et le devisA superintendent asks the AI agent by voice and gets an answer cited to the drawing and the spec

Direction des opérationsOperations leadership

Le tableau des opérations avec les risques à traiter, en cours et atténuésThe Operations board with risks to address, in progress and mitigated

Every role

Built for every role on a general contractor's team

Project managers find the clause behind any requirement and bring the citation to the site meeting.
Estimators see where the specs and drawings disagree before the price goes out.
Superintendents ask the AI agent from the field and get the answer cited to the clause.
Legal and contract managers review every contract risk with the clause behind it, and the notices drafted from them.
Operations leadership gets one standard of document review on every project.

Explore the AI agent

Integrations

Sync your documents where they already live

Telamont connects to Procore, Autodesk Construction Cloud, SharePoint, Box, Dropbox and Microsoft Project, and sends its alerts to Teams, Slack, Outlook and iMessage.

Book a demo

FAQ

Questions general contractors ask about Telamont

Aerial view of a steel frame under construction, with lifts working between the beams

How does Telamont find conflicts between drawings and specifications?

Telamont reads the drawings and the specifications together and compares what each one requires for the same element. When they disagree, for example a beam size on a structural sheet and a different size in the spec section, it flags the conflict and cites both the sheet and the section, so the team can settle it or turn it into an RFI. See risk detection and our guide to drawing and specification conflicts.

What documents and contract forms does Telamont read?

Telamont reads prime contracts, subcontracts, technical specifications, drawings, geotechnical studies and the building codes added to the project. It works with every contract form, from AIA, ConsensusDocs and CCDC to owner-written contracts, along with their supplementary conditions. Every finding cites the page it comes from. Boards then gather the obligations of each contract on one page.

Does Telamont integrate with Procore and SharePoint?

Yes. Telamont brings in project documents from Procore, Autodesk Construction Cloud, SharePoint, Box, Dropbox and Microsoft Project. It sends its alerts to Microsoft Teams, Slack, Outlook and iMessage, where the team already works.

Does Telamont work on public projects?

Yes. Public contracts often add supplementary conditions, compliance requirements and strict notice provisions, and Telamont reads them with the rest of the project documents. It flags compliance requirements the specifications do not carry and tracks notice requirements with their deadlines, and notice drafting prepares the notice from the clause.

Is our project data used to train AI models?

No. Customer documents are not used to train AI models, and the AI model providers Telamont works with retain none of the data they process. Our AI principles explain how data is handled.

How is Telamont different from ChatGPT or Copilot?

Telamont is built for construction project documents. It reads the contract, specs and drawings of a project together, runs reviews designed for construction risk, cites the page behind every finding and keeps track of what the team decides. Read the full comparison.

Is Telamont a good fit for a mid-size general contractor?

Yes. Telamont works with general contractors of every size, mid-size firms included. It reviews the documents of each project to the same standard, answers the team's questions with citations, and connects to the tools the team already uses.