This page was made for your team.
Share it with a colleague
Telamont
Martin Brothers Construction

We found 32 risks in your Mountain View Microgrid documents.

Here are 3 of the 32 risks we found in the public Mountain View Microgrid package, each with the clause and page it comes from.
Mountain View Microgrid
What we found in the
Mountain View Microgrid
documents
Finding

The PV system must provide 632.7 kW AC from 33 kW inverters, and the drawing lists 19 inverters, which is 627 kW

Section 26 31 00 requires each inverter to be rated at 33 AC kW and the PV system to provide at least 632.7 kW AC. Sheet E-010 lists inverter quantities of 7, 6 and 6, which add up to 19 inverters and 627 kW. Equipment ordered to the drawing does not reach the specified output at acceptance.

Section 26 31 00, p. 1071 · Sheet E-010, p. 64
Finding

The fueling pump controls call for 1-2-3 sequences and also allow only one pump to run at a time

Section 33 09 52 identifies two fueling pumps, while the lead-pump control lists three-pump rotation sequences and a later paragraph limits operation to one pump. The pump controls cannot be programmed to both, and the documents do not say which one governs.

Section 33 09 52, p. 1540 · Section 33 09 52, p. 1541
Finding

The geotechnical report flags contaminated groundwater but gives no extent, quantity or handling basis

The supplemental geotechnical report places groundwater about 8 feet below ground and says any excavation deeper than that is affected by CERCLA concerns. The same report states that its services did not include any environmental assessment, so the documents give no quantity, location or handling basis for contaminated soil or groundwater.

Geotechnical report, p. 291 · Geotechnical report, p. 303
Book a demo

One avoided issue usually pays for the platform. Customers report a 12 to 15x return.

Over $2 billion in projects covered
Béland Lapointe logo
Groupe Malo logo
Telamont in 90 seconds

Telamont reads every document on your projects and flags the risks.

  1. Connect your projects. Drawings, specs, contracts and addenda, straight from Procore, Autodesk Construction Cloud, SharePoint, Box or Dropbox.
  2. Get the risks, with the page. Conflicts, gaps and costly obligations, each linked to the page it comes from.
  3. Assign and follow up. Your team triages each risk and gives it an owner.
  4. Stay covered as documents change. New revisions and addenda are checked as they arrive.
Book a demo

See how contractors catch risks early with Telamont

$16.4M in potential costs avoided by our customers
Who you will meet
Alexandre Knox
Alexandre Knox
Your account owner
Nathaniel Nadeau
Nathaniel Nadeau
Runs your demo

Request received

Our team will reach out shortly to plan your demo.

Prefer to pick a time yourself?

Choose a time to meet
Oops! Something went wrong while submitting the form.
Return on investment

What our customers got from Telamont

$1.4M

Of rework avoided on one customer project, after a conflict was caught before execution.

40 to 50 h

Of document review saved per project, reported by a customer.

12 to 15x

Typical return on the platform. One avoided issue usually pays for it.

A note from our co-founder

Congratulations on the Mountain View Microgrid award. We ran Telamont on the public package to see what your team will be working with across the electrical, civil and controls scopes. A few points are worth settling with the Army early, and I would be glad to walk you through all of them.

Charles Goulet
Charles Goulet, Co-founder and CEO, Telamont

Questions from teams like yours

Site engineer reviewing project documents on a tablet
Are our documents private?

Yes. Your documents are never used to train AI models, ours or our providers'. They are encrypted in transit and at rest, and each organization's data is kept separate.

Which documents does Telamont read?

Plans, specifications and special provisions, contracts, addenda, and supplemental reports such as geotechnical and hazardous materials surveys.

How long does it take to get started?

Days, not months. After the walkthrough, one onboarding meeting trains your team and connects your projects, and the first risks come back with their pages.

Does it work with our tools?

Yes. Telamont connects to Procore, Autodesk Construction Cloud, SharePoint, Box, Dropbox and Microsoft Project, and sends alerts to Teams, Slack, Outlook and iMessage.

Get a 30-minute demo of Telamont
Book a demo