This page was made for your team.
Share it with a colleague
Telamont
Branch

We found 10 risks in your US 321 Caldwell documents.

Here are 3 of the 10 risks we found in the public US 321 Caldwell package, each with the clause and page it comes from.
US 321 Caldwell
What we found in the
US 321 Caldwell
documents
Finding

Metal pole wind design is 120 mph on signal sheet Sig. 2.2 and 110 mph on standard map Sig.M1A

Signal sheet Sig. 2.2 identifies the metal pole design as NCDOT Wind Zone 5 at 120 mph, while standard map Sig.M1A shows Wind Zone 5 at 110 mph. The wind load sets the pole and foundation design, so the two values lead to different pole and foundation prices until NCDOT confirms which one applies.

Signal Plans U-4700CA, Sig. 2.2 (p. 4 of 35) and Sig.M1A (p. 24 of 35)
Finding

Manhole frame and cover weights are 262 and 170 lb in the detail but 182 and 120 lb in the notes

Utility sheet UC-3C shows a 262 lb frame and a 170 lb cover in the manhole detail, while its notes call for a minimum frame weight of 182 lb and a minimum cover weight of 120 lb. The castings can be ordered at either weight, and the heavier detail values cost more per manhole, so the weight that governs is worth confirming before the order.

Utility Construction Plans, Addendum No. 1, sheet UC-3C, p. 13 of 15
Finding

Every water and sewer line stays active and the sewer bypass pumps must carry full flows, with no flow figure given

The utility provisions keep all water and sewer lines active during construction, make the bypass work incidental to other utility pay items, and require a sewer bypass pump plan with primary and backup pumps and telemetry to carry full flows. Telamont found no existing sewer flow figure in the package, so the pumps cannot be sized from the documents and the first question for the City is the flow.

Project Proposal, NCDOT C204947, p. 147 and p. 150 of 351
Book a demo

One avoided issue usually pays for the platform. Customers report a 12 to 15x return.

Over $2 billion in projects covered
Béland Lapointe logo
Groupe Malo logo
Telamont in 90 seconds

Telamont reads every document on your projects and flags the risks.

  1. Connect your projects. Drawings, specs, contracts and addenda, straight from Procore, Autodesk Construction Cloud, SharePoint, Box or Dropbox.
  2. Get the risks, with the page. Conflicts, gaps and costly obligations, each linked to the page it comes from.
  3. Assign and follow up. Your team triages each risk and gives it an owner.
  4. Stay covered as documents change. New revisions and addenda are checked as they arrive.
Book a demo

See how contractors catch risks early with Telamont

$16.4M in potential costs avoided by our customers
Who you will meet
Alexandre Knox
Alexandre Knox
Your account owner
Nathaniel Nadeau
Nathaniel Nadeau
Runs your demo

Request received

Our team will reach out shortly to plan your demo.

Prefer to pick a time yourself?

Choose a time to meet
Oops! Something went wrong while submitting the form.
Return on investment

What our customers got from Telamont

$1.4M

Of rework avoided on one customer project, after a conflict was caught before execution.

40 to 50 h

Of document review saved per project, reported by a customer.

12 to 15x

Typical return on the platform. One avoided issue usually pays for it.

A note from our co-founder

The US 321 intersections in Caldwell County bring 23 plan sets and a corridor shared with other contracts through 2030. We ran Telamont on the public NCDOT package to see what your team will be working with. A few points are worth settling with NCDOT early, and I would be glad to walk you through all of them.

Charles Goulet
Charles Goulet, Co-founder and CEO, Telamont

Questions from teams like yours

Site engineer reviewing project documents on a tablet
Are our documents private?

Yes. Your documents are never used to train AI models, ours or our providers'. They are encrypted in transit and at rest, and each organization's data is kept separate.

Which documents does Telamont read?

Plans, specifications and special provisions, contracts, addenda, and supplemental reports such as geotechnical and hazardous materials surveys.

How long does it take to get started?

Days, not months. After the walkthrough, one onboarding meeting trains your team and connects your projects, and the first risks come back with their pages.

Does it work with our tools?

Yes. Telamont connects to Procore, Autodesk Construction Cloud, SharePoint, Box, Dropbox and Microsoft Project, and sends alerts to Teams, Slack, Outlook and iMessage.

Get a 30-minute demo of Telamont
Book a demo